Wiring/misc 3 hrs

Last night I worked on modifying my exhaust to get out the bottom of the cowling. I will weld them at work today. I also cleaned up the wiring on the right side of the engine and tied everything up.   I ran my fuel line from my gascolator to the carb. I will add fire sleeve to this and use a different hose for final assembly.  I installed my canopy with the final nuts welded on the backside of the canopy slide instead of riveting. This will allow the canopy to be removed easier than it would've been with rivets. I received my spinner and drilled the backplate. I installed two wire stops on each side of the throttle line for secondary protection if the bug nut failed.