Friday, February 21, 2014

Spinner 3 hrs

Tonight I mounted the spinner. I removed the prop. I made a template out of a Manila folder for the cutout of the spinner where it goes over the prop.  I cut it out with snips then I trimmed and fit, trimmed and fit, trimmed and fit, trimmed and fit.  Did I mention I trimmed and fit?  I got the fit I was looking for so I drilled 1/8" holes at the base, then enlarged to 3/16" and deburred. I remounted the prop/spinner with the shorter bolts I got today. Looks good. 

No comments:

Post a Comment