Interior assembly 4 hrs

Today I worked on assembly in the cockpit. I reinstalled my rudder pedals. All that I need to complete them is to rivet the plate they are attached to, to the floor.  I applied some padding to the supports for the fuel tsnk and installed the fuel tank. I wired the fuel level sending unit and mounted the tank. I still need to plumb my tank vent and tank drain.  I applied 5 layers of masking tape to the fuselage and wing at the area of the wing root leading edge fairing. I cut a bonds scraper to the profile of the leading edge wing root fairing and tooled polyurethane caulking to that profile around the leading edge. I removed the tape and will prime once the caulking is fully cured.