Painting & aileron rigging 7 hrs

Today I removed my instrument panel and glareshield. I removed all of the instruments and painted my panel. I put three coats of self etching priming followed by wet sanding with 600 grit. Then I applied several coats of spray on truck bed liner. I love the finish. I spray

My glare shield with flat black to prevent any reflections.  I also cut and tapped one of my aileron pushrods and hooked it up to my left aileron. I fabricated the two control horns for my right aileron. I finished trimming my wing gap fairing for the left wing. I cut out the blank for the forward wing to fuselage fairing for the right side. I will form it at work tomorrow.