Rudder cable and deburring 9 hours

Today I ran the other rudder cable, trim cable, and a polyethylene tube to run wire in for the tail light/strobe. I also deburred all of the rear fuselage skins and filed the edges smooth. I introduced my son to the deburring tool. He thought it was " fun". Glad he likes it. I reinstalled the skins with clecos then removed for some final trimming. After that I reinstalled the skins and am ready for riveting. I plan on riveting one of the side skins and the bottom skin then leaving the other side attached with clecos so I have access later if needed. I also fabricated the angle pieces that secure the rudder control cables at the rear of the fuselage.